Digital Output

Esb1983 · Post by **Esb1983** » Mon Apr 06, 2015 3:44 am

Hi

I need an example for PowerVision 2.7 that uses a button to activate the digital output to an adjustable level for the PV450.

Regards

stalley · Post by **stalley** » Mon Apr 06, 2015 9:01 am

Hello Esb1983,

There isn't much to this, one button for on/high and one button for low/off.

Basic DO PV450.zip: (212.65 KiB) Downloaded 40 times

Esb1983 · Post by **Esb1983** » Tue Apr 21, 2015 9:35 am

Hello

This message appears when try to open ·

"Selected Configuration is newer than the aplicattion version "
"Can not open confuiguration"

My PowerVision Configuration Studio(Released Build)

Build: 2.7.10439(6/30/2014)
Part Number: 78-33-3154

Thanks

stalley · Post by **stalley** » Tue Apr 21, 2015 9:48 am

Hi Esb1983,

The config was built with the 2.7 Patch 4 Release of PowerVision Configuration Studio found here. If you are an OEM user, you should find a Patch 4 Release in the OEM forum.

Thanks! Please let me know if there is anything else I can help with.

Esb1983 · Post by **Esb1983** » Thu Apr 23, 2015 2:32 am

stalley wrote:Hi Esb1983,

The config was built with the 2.7 Patch 4 Release of PowerVision Configuration Studio found here. If you are an OEM user, you should find a Patch 4 Release in the OEM forum.

Thanks! Please let me know if there is anything else I can help with.

HI

Need to increase the voltage from 0V to 5V with each press, step by step, I'm testing but I get up the voltage of the digital output, you could use the output PWM controlling it

Thanks Sara

stalley · Post by **stalley** » Thu Apr 23, 2015 10:19 am

Hello esb1983,

A digital output is going to be "ON" closed to ground and "OFF" open to ground, as implied by it being a digital output.

Are you asking about the frequency output on a PV780? If so, there is a forum topic viewtopic.php?f=7&t=1022&p=2890&hilit=f ... tput#p2890 that has some information about the frequency output.

What product and output, specifically, are you asking about?

Esb1983 · Post by **Esb1983** » Fri Apr 24, 2015 1:10 am

stalley wrote:Hello esb1983,

A digital output is going to be "ON" closed to ground and "OFF" open to ground, as implied by it being a digital output.

Are you asking about the frequency output on a PV780? If so, there is a forum topic viewtopic.php?f=7&t=1022&p=2890&hilit=f ... tput#p2890 that has some information about the frequency output.

What product and output, specifically, are you asking about?

Hi

My product is PV450 and output digital

Thanks

Esb1983 · Post by **Esb1983** » Mon May 04, 2015 8:04 am

Hi

As I can control the duty cycle of the digital output of pv450, to control the level of voltage.

Regards

Digital Output

Digital Output

Re: Digital Output

Re: Digital Output

Re: Digital Output

Re: Digital Output

Re: Digital Output

Re: Digital Output

Re: Digital Output