Welcome
Please help to configure the RTC in the PV780.
I tried to use RealTimeClock.SetMinute + 1, but does not work.
Thank you for your help.
Łukasz
Set RTC in PV780
- ZDPIMB
- Posts: 1
- Joined: Wed Dec 19, 2012 7:15 am
- stalley
- Enovation Controls Development
- Posts: 618
- Joined: Tue Mar 18, 2014 12:57 pm
Re: Set RTC in PV780
Hello ZDPIMB,
You are making a good start. It is always easier for me if I can see an example.
Look in the Murphy Standard PV780 config that is provided with PowerVision Configuration Studio.
In this config, a variable, TimeInSeconds displays the time. TimeInSeconds is based on the RealTimeClock.Hour and RealTimeClock.Minute System variables.
In the Programming tab, look under the Custom - Display Selection. Look at how the TimeInSeconds and TimeInSecondsSet get used. The event, Update Clock and Restart, will cause the RTC to be updated. It might cause a reboot also.
Letting the user set the clock is on the Menu Layer.
Hope this helps! If you have more questions, please ask.
You are making a good start. It is always easier for me if I can see an example.
Look in the Murphy Standard PV780 config that is provided with PowerVision Configuration Studio.
In this config, a variable, TimeInSeconds displays the time. TimeInSeconds is based on the RealTimeClock.Hour and RealTimeClock.Minute System variables.
In the Programming tab, look under the Custom - Display Selection. Look at how the TimeInSeconds and TimeInSecondsSet get used. The event, Update Clock and Restart, will cause the RTC to be updated. It might cause a reboot also.
Letting the user set the clock is on the Menu Layer.
Hope this helps! If you have more questions, please ask.
Sara Talley
Software Engineer
Enovation Controls
Software Engineer
Enovation Controls