where can i get the resistor speedsheet for the analog inputs?
thx
resistor speedsheet
- twang
- jtilley
- Enovation Controls Development
- Posts: 31
- Joined: Wed Sep 08, 2010 10:02 am
Re: resistor speedsheet
The analog input spreadsheet is attached to this post.
The first sheet contains the raw ADC counts for each analog channel in resistive mode with 1x gain, using the different pull-up resistance values available in the config tool.
The second sheet is the same thing, but with 2x gain on each analog channel.
The third sheet shows the raw analog counts for each analog channel configured for Analog (voltage) mode. Both 1x and 2x gain is shown on this sheet.
All of the ADC count values in this sheet were measured on a single unit, so the raw counts on your particular PV750 might be off by a little (10 counts or so).
Let me know if you have any questions.
The first sheet contains the raw ADC counts for each analog channel in resistive mode with 1x gain, using the different pull-up resistance values available in the config tool.
The second sheet is the same thing, but with 2x gain on each analog channel.
The third sheet shows the raw analog counts for each analog channel configured for Analog (voltage) mode. Both 1x and 2x gain is shown on this sheet.
All of the ADC count values in this sheet were measured on a single unit, so the raw counts on your particular PV750 might be off by a little (10 counts or so).
Let me know if you have any questions.
- Attachments
-
- PV750_IO_Test.xlsx
- (31.25 KiB) Downloaded 130 times
Joe Tilley
Software Engineer
FW Murphy
Software Engineer
FW Murphy