Hello,
I have connected 2 color video cameras in to PV780 video input 1 & 2. It is communicating normally but showing Black & white images... My customer need camera in color... could you help me to fix it...
COLOR VIDEO CAMERA TURNED TO BLACK & WHITE IN PV780
- akhilpauly
- Posts: 16
- Joined: Fri Mar 14, 2014 8:02 am
- ecarmen
- Murphy Representative
- Posts: 8
- Joined: Mon Sep 13, 2010 10:47 am
Re: COLOR VIDEO CAMERA TURNED TO BLACK & WHITE IN PV780
Can you tell us what the model number of the cameras are and how you have them connected.
Thanks
Thanks
- akhilpauly
- Posts: 16
- Joined: Fri Mar 14, 2014 8:02 am
Re: COLOR VIDEO CAMERA TURNED TO BLACK & WHITE IN PV780
Hello,
Please find the camera specifications below.
Camera make: Nexsys UK
Model: NS-DIT20-CM6030-ICR
System: PAL
Specifications: Color 1/4" 600TVL, with IR-CUT
Lens: 3.6 mm
There is only a power & signal connector with the camera, we connected the power to 12 VDC battery and signal to PV780 pin 1 and its ground to PV780 pin 9.
Please find the camera specifications below.
Camera make: Nexsys UK
Model: NS-DIT20-CM6030-ICR
System: PAL
Specifications: Color 1/4" 600TVL, with IR-CUT
Lens: 3.6 mm
There is only a power & signal connector with the camera, we connected the power to 12 VDC battery and signal to PV780 pin 1 and its ground to PV780 pin 9.
- stalley
- Enovation Controls Development
- Posts: 618
- Joined: Tue Mar 18, 2014 12:57 pm
Re: COLOR VIDEO CAMERA TURNED TO BLACK & WHITE IN PV780
Hello akhilpauly,
What version of PowerVision Configuration Studio are you using?
The latest 2.8 patch may be downloaded from here: viewtopic.php?f=3&t=1321
Are you certain you have set the video widget in the page designer to use PAL and not NTSC? Do you have any events/actions that will switch the video to the wrong format?
This topic is in the wrong forum, so I will need to move it to the PowerVision forum. This forum is for CANCapture questions.
What version of PowerVision Configuration Studio are you using?
The latest 2.8 patch may be downloaded from here: viewtopic.php?f=3&t=1321
Are you certain you have set the video widget in the page designer to use PAL and not NTSC? Do you have any events/actions that will switch the video to the wrong format?
This topic is in the wrong forum, so I will need to move it to the PowerVision forum. This forum is for CANCapture questions.
Sara Talley
Software Engineer
Enovation Controls
Software Engineer
Enovation Controls
- akhilpauly
- Posts: 16
- Joined: Fri Mar 14, 2014 8:02 am
Re: COLOR VIDEO CAMERA TURNED TO BLACK & WHITE IN PV780
Hello Sara,
I am using Power Vision.Installer.2.8.10528 version. please find the attached file, in that i have assigned video inputs, and its working in black & white. my Video input is PAL...
If you can fix it for me, it will be helpful..
I am using Power Vision.Installer.2.8.10528 version. please find the attached file, in that i have assigned video inputs, and its working in black & white. my Video input is PAL...
If you can fix it for me, it will be helpful..
- Attachments
-
- video input activation-REV0.zip
- (694.52 KiB) Downloaded 14 times
- stalley
- Enovation Controls Development
- Posts: 618
- Joined: Tue Mar 18, 2014 12:57 pm
Re: COLOR VIDEO CAMERA TURNED TO BLACK & WHITE IN PV780
Did you change the Screen.VideoMode variable to be PAL?
- Attachments
-
- VideoMode.png (56.48 KiB) Viewed 96 times
Sara Talley
Software Engineer
Enovation Controls
Software Engineer
Enovation Controls
- akhilpauly
- Posts: 16
- Joined: Fri Mar 14, 2014 8:02 am
Re: COLOR VIDEO CAMERA TURNED TO BLACK & WHITE IN PV780
Thank you so much Sara, It is done....