Hello,
I am writing a program and I started with PV750 Marine program from Murphy. Much of the program does not apply, so I deleted most of the pages and code, but I wanted the engine diagnostics to remain.
My question is - where is this page in the Configuration tool? I see that the PB runs "KeyStartDM2Application," and on the display the Engine Diagnostics page is there, but I don't see it anywhere in the Config tool. Is this hidden somewhere?
Thanks,
Phil
Engine Diagnostics page
- drphil69
- Posts: 139
- Joined: Wed Mar 02, 2011 5:59 pm
- ksaenz
- Enovation Controls Development
- Posts: 263
- Joined: Thu Aug 19, 2010 7:53 am
Re: Engine Diagnostics page
Hello drphil69,
In the PV750 the DM2 page is controlled by the DM2 app. You can go to Environment Setup, select the Diagnostic Messages DM2 Application and change the text and graphics that are used in that page.
If you want you can also create your own DM2 page from scratch using the DM2 actions, variables, and events found in the Diagnostic Messages application. You can look at the PV450 configuration for an example and let us know if you have more questions.
Regards,
ksaenz
In the PV750 the DM2 page is controlled by the DM2 app. You can go to Environment Setup, select the Diagnostic Messages DM2 Application and change the text and graphics that are used in that page.
If you want you can also create your own DM2 page from scratch using the DM2 actions, variables, and events found in the Diagnostic Messages application. You can look at the PV450 configuration for an example and let us know if you have more questions.
Regards,
ksaenz