I just recieved 4 new displays with bootloader 2.2.10010 installed on them. Previously, I had been updating my displays to bootloader 2.1.1 to be able to use the shutdown function after ignition off to shutdown the display (previous versions would reboot the display). Every one of the new displays is rebooting when the ignition is removed. The configuration I am using is the same configuration that I use with bootloader 2.1.1 without this issue.
On a similar note, I have had 1 display that I upgraded to bootloader 2.1.1 that did have this same issue, and it has been sent back for warranty review. I currently have 16 displays in the field working with 2.1.1, the same configuration, and no issue.
The question is, is this an issue with bootloader 2.2.10010, or is it an issue with hardware?
Bug? Bootloader 2.2.10010 - ignition reboot
- mbowdich
- Posts: 209
- Joined: Tue Oct 05, 2010 10:54 am
- jpurdum
- Enovation Controls Development
- Posts: 153
- Joined: Mon Jun 21, 2010 11:19 am
Re: Bug? Bootloader 2.2.10010 - ignition reboot
mbowdich -
Sorry for this inconvenience. We found a software solution for this, and we are releasing a fix for this and a few other things in a 2.2 Patch 1 release. We will be making that available on the forum hopefully by tomorrow.
jpurdum
Sorry for this inconvenience. We found a software solution for this, and we are releasing a fix for this and a few other things in a 2.2 Patch 1 release. We will be making that available on the forum hopefully by tomorrow.
jpurdum