Tattletale annunciators and magnetic switches are the nerve centers that translate Swichgage® contact operations into decisions and operate the alarm or shutdown device.
These switches are the electrical load carrying devices for the alarm or shutdown device. Tattletale annunciators indicate which monitored function failed leading to the alarm or shutdown magnetic switches do not. Magnetic switches operate basically as a latching relay.
Coil Voltage:
12 volt
24 volt
12/24 volt*
120 VAC
Magneto ignition
CD ignition
*Multi-voltage AC or DC systems. See circuit desriptions below.
‡ Does not latch after shutdown signal clears, automatically resets.
Coil Resistances (OHMS):
Product – Coil Resistance in OHMS, or coil and resistor
117 – 18
117PH – 18
MS2100 – 288
MS2110 – 18
MS2111 – 72
MS2120 – 0.5
518PH – 339/678 for 12/24
518APH – 339/678 for 12/24
518E – 339/678 for 12/24
520APH – 339/618 for 12/24
521PH – 339/678 for 12/24
760A – 90/190 for 12/24
761APH – 18
822PH – 30
R129A – 90/190 for 12/24
Contacts (see Note 2 below):
NCH
NOH
NCG
NOG
(A): Dry contacts normally wired in hot circuit.
(B): Dry contacts normally wired in ground circuit.
Latch Type:
Energize to trip
Energize to latch
Reset Type:
Manual indicating
Manual non-indicating
Electric non-indicating
Time Delay
Before shutdown
Start only
After shutdown
NOTES: The information above indicates features/configurations available for each model.1. Coil Voltage – Coils are specific voltage rated or multiple voltage rated. 2. Contacts – This is the control circuit output. In the lathed position the NCH contact has a “hot” output. In the latched position, the NCG has a “grounded” output; in the tripped position, the NOG has a “grounded” output. 3. Latch Type – Refers to whether the magnetic coil is momentraily energized to trip or requires continuous power in the operating mode and de-energizes to trip. 4. Reset Type – Refers to manual or electric reset; manual indicating type is a TATTLETALE. 5. Time Delay – Indicates operation of the time delay. |
Additional product documentation can be found on our product support website or by clicking the Help Center button.
All configurations may not be available. Call your sales representative or Enovation Controls for more information. See sales bulletin for additional details and accessories.