MURPHYLINK® SERIES PANELS (ML25-ML150)

Posted on: January 3rd, 2023 by Barn3s

MurphyLink® Panels are available in a variety of models featuring varying levels of features and functionality to suit your particular application.

The ML Series panels take advantage of Murphy’s PowerView® technology to integrate and display valuable insight from electronic J1939 engines. Panels equipped with a PV101 display give operators more information than traditional gauges by allowing operators to view multiple engine parameters on a single screen. ML series panels come with a variety of display and throttling capabilities, including gauge cutouts on some models that allow you to add critical gauges specific to your application. For applications with emissions requirements, some ML series panels can be equipped with Tier 4 controls. ML series panels are capable of handling sophisticated engine diagnostics as well as basic engine alarm/shutdown with integrated throttle control.


ML25

ML50

ML100

ML150

MLC380
Features
  • PowerView® 25 Display
  • Uses SAE J1939 CAN network
  • Increment / Decrement throttle switch
  • Optional Tier 4 regeneration switch
  • Keyswitch
  • Fuse
  • 21-Pin Deutsch connector
  • Murphy standard shock mounts
  • Black powder-coated enclosure
  • Enclosed or Flat Panel
  • PowerView® 25 Display
  • Uses SAE J1939 CAN network
  • PVCAN water temperature and oil pressure gauges
  • Increment / Decrement throttle switch
  • Optional Tier 4 regeneration switch
  • Keyswitch
  • Fuse
  • 21-Pin Deutsch connector
  • Murphy standard shock mounts
  • Black powder-coated enclosure
  • Enclosed or Flat Panel
  • PowerView® 101 Display
  • Uses SAE J1939 CAN network
  • Increment / Decrement throttle switch
  • Optional Tier 4 regeneration switch
  • Keyswitch
  • Fuse
  • 21-Pin Deutsch connector
  • Murphy standard shock mounts
  • Black powder-coated enclosure
  • Enclosed or Flat Panel
  • PowerView® 150 Display
  • Uses SAE J1939 CAN network
  • PVCAN water temperature and oil pressure gauges
  • Space for two additional gages
  • Various throttle options available (Increment / Decrement, Variable, Morse, No Throttle)
  • Optional Tier 4 regeneration switch
  • Keyswitch
  • Two fuses
  • 21-Pin Deutsch connector
  • Murphy standard shock mounts
  • Black powder-coated enclosure
  • Enclosed or Flat Panel
  • PowerView® 380 Display
  • Uses SAE J1939 CAN network
  • Compact in Size
  • Configurable display screens
  • Tier 4 functionality
  • Keyswitch
  • TSC1 Throttling
  • Fuse
  • 21-Pin Deutsch connector & 31 Pin for Additional I/O
  • Murphy standard shock mounts
  • Black powder-coated enclosure
Murphy Industrial Harness Line
The Murphy Industrial Harness (MIH) product line will allow connection from ML Panels to all major engine manufacturer’s engines. For more information on the MIH panel series, please contact our Sales team at
sales@ec.barn3s.com, or call 918.317.4100 and ask for Sales.

MLC485 PANELS

Posted on: January 3rd, 2023 by Barn3s

The MurphyLink Series MLC485 Panel brings color display control to Stage V and Tier 4 engines.

The rugged MLC485 control panel brings the power and functionality of the 4.3-inch color PowerView® 485 display into an out-of-the-box panel solution for any engine-driven application with a keyswitch and optional emergency stop. It offers a wide array of configurable I/O, including an RS485 serial connection, and support for both mechanical and J1939 electronic engines. Designed to alleviate most user’s need for custom programming, the PV485 comes with standard software that enables complete configuration from the unit, including out of the box support for Stage V and Tier 4 Final emission controls on compatible engines. From the display, operators can also customize gauges and parameter choices, access diagnostic tools, import and export settings to USB and more. The panel utilizes industry standard Deutsch connectors and is compatible for use on the simplest to the most advanced, fully electronic Tier 4 engines, when used with the correct Murphy Industrial Harness or John Deere OEM engine harnessing. This panel is available in a rugged powder-coated cold rolled steel enclosure that can be mounted on or near the engine.

MLC380 PANELS

Posted on: January 3rd, 2023 by Barn3s

The MurphyLink Series MLC380 Panel, engineered and built by Enovation Controls’ Industrial Panel Division, is a superior panel offering that includes the powerful, yet simple-to-configure PV380 display.

The MLC380 panel has the ability for the software to be fully configured from the front user interface. If the default parameters set by Enovation Controls are not the desired set points, the packager or operator has the ability to change these settings. The configuration tool also allows for the splash screen to incorporate a company logo when powered on. The flexibility of the MLC380 allows for the same panel to be used across many applications. This provides the operator familiarity with the display and panel in any application. The panel utilizes industry standard Deutsch connectors and is compatible for use on the simplest to the most advanced, fully electronic Tier 4 engines, when used with the correct Murphy Industrial Harness or John Deere OEM engine harnessing. This panel is available in a rugged powder-coated cold rolled steel enclosure that can be mounted on or near the engine.

ML1000-4X PANELS

Posted on: January 3rd, 2023 by Barn3s

Murphy’s ML1000-4X incorporates all the power and functionality of the PowerCore MPC-10 Controller in a panel solution for most any engine-driven application.

The ML1000-4X features a polycarbonate enclosure and standard harnessing for most major engine manufacturer ECUs. It is IP67 rated to withstand harsh environments and features an out-of-the-box, fully sealed, powerful all-purpose industrial controller. ML1000 is Tier 4 / Stage IV ready and features three configurable levels of passcode protection, perfect for rental applications. It is engineered for incredibly easy initial setup and is configurable by the user to meet the most versatile applications, allowing for quick uptime and less headaches on the manufacturing floor or in the field.

MGC1000 PANELS

Posted on: January 3rd, 2023 by Barn3s

The MurphyLink Series MGC1000 Panel, engineered and built by Enovation Controls’ Industrial Panel Division, is a superior panel offering for generator control with the powerful, yet simple-to-configure MPC-10 controller.

The MPC-10 is a general, all-purpose manual/auto start engine controller. The controller is purposed primarily for applications where a wide array of inputs and outputs are not required. The MPC-10 supports J1939 CAN protocols for electronically governed engines as well as analog sensors on mechanical engines for fault and safety shutdowns.

The Control Panel utilizes industry-standard Deutsch connector and is compatible for use on the simplest mechanical engine to the most advanced, fully electronic Tier 4 engines, when used with the correct Murphy Industrial Harness1 (MIH) or John Deere OEM engine harnessing. The MGC1000 panel can be mounted directly to the engine or engine/application cover.

EMC SERIES

Posted on: January 3rd, 2023 by Barn3s

The EMC is a compact but powerful single fan bank controller for use with +12Vdc or +24Vdc variable speed brushless fans.

The controller provides a low current varying PWM signal to the fan/s based on command inputs. Setup and system monitoring are easily accomplished through the graphical user interface (GUI). This controller is complete with many selectable input and output configurations along with On-Demand and Set-Point command modes. The health of the fan system can easily be determined by the diagnostic LED’s, the diagnostic J1939 CAN Bus messages from the controller, and by monitoring the system using the software interface.

KEYSTART

Posted on: January 3rd, 2023 by Barn3s

Keystart control modules provide manual start/stop and automatic fault protection for generators, pumps and other engine-driven applications.

Outputs allow control of engine fuel (energized to run),  starter motor and preheat. The Keystart also has an alarm output for remote or audible warning of faults. Six LEDs and icons indicate engine status and faults. Four switch inputs (closing to negative on fault) enable automatic shutdown on engine low oil pressure, high coolant temperature and auxiliary faults. Model 9621 has a fully adjustable engine overspeed shut-down feature, configurable for either generator AC or magnetic pickup speed signals. Charge alternator excitation and a charge fail warning LED are standard.

CASCADE

Posted on: January 3rd, 2023 by Barn3s

The Cascade controller offers automatic start and stop control with easy configuration for a broad number of applications.

This auto-start controller is designed to fit any engine-driven application requiring a simple and robust automatic start and stop sequence. Pumps, compressors, grinders, power units and generators are just a few of the industrial applications for the controller. The Cascade controller is fully compatible with all major engine types. Whether you are running mechanical or J1939 engines, the controller will work with your application. The Cascade CD101 controller can also be used to replace legacy ASM150, ASM160 and ASM170 controllers.

POWERCORE® TEC‑10

Posted on: January 3rd, 2023 by Barn3s

Murphy’s PowerCore® TEC-10 panel provides full control with easy setup and installation.

A superior turnkey electronic controller, the PowerCore® TEC-10 panel provides full control of your engine including auto start/stop, auto throttling and display of engine parameters along with critical faults from the engine/application. The TEC-10 supports SAE J1939 CAN protocols for electronically governed engines as well as analog sensors on mechanical engines for fault and safety warnings/shutdowns.

POWERCORE® MPC‑10

Posted on: January 3rd, 2023 by Barn3s

Murphy’s PowerCore MPC-10 is a configurable, all-purpose controller perfect for rental and fleet applications.

This powerful controller is a general controller for mechanical or electronic engine applications needing manual/auto start and manual/auto throttling. It supports J1939 CAN protocols for electronically governed engines as well as I/O for mechanical engines for fault and safety shutdowns. MPC-10 boasts three levels of menu security, perfect for rental fleet protection, which can easily be set with the configuration tool. It is designed for all weather environments and is also available as the ML 1000-4X panel solution. The menu structure is incredibly user-friendly, with the ability to change many parameters and settings from the face without the need of a PC tool, if desired.

POWERCORE® MPC‑20

Posted on: January 3rd, 2023 by Barn3s

Murphy’s PowerCore MPC-20 is a powerful, all-purpose industrial controller designed to work in the harshest environments on most any engine-driven application.

Targeted for pump and irrigation applications, the MPC-20 is a powerful, fully-sealed IP67-rated all-purpose industrial controller built to withstand harsh environments. Tier 4 Final and Stage V ready with auto and manual start, the MPC-20 includes various throttling options and a real-time clock. Easily viewable in full-sun conditions, MPC-20 has a large 3.8-inch easy-to-read, monochrome transflective LCD. It is engineered for incredibly easy initial setup and is configurable by the user to meet the most versatile applications, allowing for quick uptime and less headaches on the manufacturing floor or in the field. Although a configuration tool is not required, the easy-to-use PowerVision Configuration Studio® software allows configuration of set points on a PC to save for future loading. The MPC-20 is also available in an ML2000 panel solution.

POWERVIEW® 700

Posted on: January 3rd, 2023 by Barn3s

The Murphy PowerView® 700 is the ultimate rugged display for tough environments.

The PowerView 700 is a full-color 7-inch configurable display that integrates vital engine, transmission and diagnostic information into an easy-to-read operator interface. With an IP69K-rated enclosure, glove-friendly capacitive touch screen and an optically-bonded cover glass for superior sunlight visibility, the PV700 thrives in all-weather environments. The button-less modern design keeps the PV700 compact and durable for in-cab or exterior applications with the perfect amount of power to deliver increased productivity, efficiency and control. New for the PV700 is the ability to host four video inputs with the ability to view two video feeds simultaneously.

PV700 is programmable exclusively with PowerVision Configuration Studio® (See How to Order tab for details). Graphic interface not included, custom programming required.