Products Archive

UCONTROL™ MC4‑21‑14‑H8

Posted on: January 3rd, 2023 by Barn3s

The uControl MC4-21-14-H8 high-current machine controller offers powerful control with software-selectable 15A outputs.

This high-current uControl mobile controller offers extra power with (8) 15A PWM outputs with dedicated status LEDs for each high-current output. Combined with 14 standard software selectable outputs, it features a total of 22 outputs and 21 inputs.

Built to perform in high heat and high vibration areas, uControl machine controllers deliver extreme durability with precision control. Featuring multiple CAN interfaces, open/short circuit protection, flexible universal inputs and software selectable outputs, uControl mobile controllers are ready and scalable for a variety of equipment needs and applications.

MURPHY INDUSTRIAL HARNESSES

Posted on: January 3rd, 2023 by Barn3s

Murphy Industrial Harnesses bring universal connection to any engine.

Murphy Industrial Harnesses are built to the specifications of each engine manufacturer and customer. When requesting the MIH Harness, specific information will be obtained so that the correct harness may be built for your engine.

ZERO OFF GPS SPEED CONTROL SYSTEM

Posted on: January 3rd, 2023 by Barn3s

Zero Off is a GPS speed control based solely on input from satellites and engine management systems. It is based on the speed you are traveling across the surface of the water; therefore, there is no requirement for skier weight, crew weight, KX, PX or even any kind of wind adjustment. You simply set the desired speed and go. This easy-to-use technology has made Zero Off the industry standard.

Zero Off has been tested and developed since early 2005, not only with some of the best skiers in the world, but also with engineers who develop the engine management systems for the boats. Zero Off has the same concept of pull for all events in our sport and has built-in timing that does not require magnets on the course.

XM500

Posted on: January 3rd, 2023 by Barn3s

The XM500 module is a configurable Input/Output (I/O) module designed to bring analog and digital inputs and output onto the SAE J1939 CAN.

The XM500 is ideally suited to bring the additional information needed onto the J1939 CAN bus and can be configured to broadcast fault codes and activate digital outputs per input condition such as fuel level low, hydraulic oil temperature high, etc. Because the XM500 broadcasts information using the J1939 standard protocol, the information can be displayed using standard J1939 display modules, such as the PowerView^® 101.

POWERCORE® CXM-110

Posted on: January 3rd, 2023 by Barn3s

The Murphy PowerCore CXM-110 configurable expansion module is an out-of-the-box fully sealed industrial I/O module for various environments and applications.

This module features an abundance of I/O which can be used to add information to an existing CAN bus or create one. The CXM-110 module allows users to program and develop to the needs of the application using PowerVision Configuration Studio. Customize the software as an autostart or auto throttling controller with the ability to interface with one of the fully programmable displays in Murphy’s portfolio of products. The CXM-110 is targeted to support any industrial application where additional I/O is needed and quality is desired.

CANDRIVE™

Posted on: January 3rd, 2023 by Barn3s

CANdrive offers a cost-effective instrument solution for modern electronic engines.

CANdrive modules read engine ECU CAN bus/J1939 data, drive standard electric panel gauges and provide LED indication of status and faults. CANdrive has three dedicated outputs for tachometer, oil pressure and coolant temperature gages, with DIP switch selectable compatibility for Murphy, VDO or Datcon gauges. For volume orders, the outputs can be custom configured for other gage types, lamps, relays or remote signaling.

WHB SERIES

Posted on: January 3rd, 2023 by Barn3s

The WHB Series open type panels are the industry standard for High Plains irrigation engines.

These panels bolt directly to the engine flywheel housing. They include Swichgage protection for low engine oil pressure and high coolant or high oil temperature and have provision to add additional Swichgage instruments, such as a pump discharge pressure, voltage regulator, throttle cable and start button or switch.

MARINE ENGINE PANELS

Posted on: January 3rd, 2023 by Barn3s

Maximize the monitoring and alarm capabilities for your mechanical engine with Murphy’s panel solutions designed specifically for commercial marine applications.

The 100 Series and 300 Series provide the durability, reliability and functionality essential for your engine and offer a broad range of features from which to choose.

Designed Specifically for Commercial Marine, Mechanical Engine Applications
Full and Broad Compliment of Features and Functionality
High-Quality Construction and Components Designed to Withstand the Rigors of Marine Life
Local and Remote Panel Options

READY TO RUN PANELS FOR MTU® ENGINES

Posted on: January 3rd, 2023 by Barn3s

Get running in minutes with Murphy’s Ready To Run Panel for MTU Engines.

Ready to Run panels give you full panel control for your MTU engine while connecting all engine control modules in a panel designed to conveniently house the CPC4. Murphy’s RTR solution provides you with all of the MTU-specified circuit protection and harnessing in a complete plug-and-play package.

Ready to Run Panels are engineered to manufacturers’ requirements and work out of the box with minimal set-up time. These panels put control at your fingertips allowing operators to monitor and change settings easily in the field.

Supported Engines:

FT4 LPR Series 1000, 1100, 1300, 1500

READY TO RUN PANELS FOR DOOSAN® ENGINES

Posted on: January 3rd, 2023 by Barn3s

Get running in minutes with Murphy’s Ready To Run Panels for Doosan Engines.

The panels have everything you need in one plug-and-play solution. Match your needs with the best option whether you need engine monitoring or a more sophisticated full engine control system. With several levels of panel options, it will be easy to find the solution right for you.

The Ready to Run Panels are engineered to manufacturers’ requirements and work out of the box with minimal set-up time. These panels put control at your fingertips allowing operators to monitor and change settings easily in the field.

Supported Engines:

FT4 D10 – 4500
FT4 D10 – 4800
FT4 D18
FT4 D24
FT4 D34
FT4 D34 SCR

READY TO RUN PANELS FOR ISUZU® ENGINES

Posted on: January 3rd, 2023 by Barn3s

Get running in minutes with Murphy’s Ready To Run Panels for ISUZU Engines.

Supported Engines:

FT4 4LE2
FT4 4JJ1T

MURPHYLINK® SERIES PANELS (ML25-ML150)

Posted on: January 3rd, 2023 by Barn3s

MurphyLink^® Panels are available in a variety of models featuring varying levels of features and functionality to suit your particular application.

The ML Series panels take advantage of Murphy’s PowerView^® technology to integrate and display valuable insight from electronic J1939 engines. Panels equipped with a PV101 display give operators more information than traditional gauges by allowing operators to view multiple engine parameters on a single screen. ML series panels come with a variety of display and throttling capabilities, including gauge cutouts on some models that allow you to add critical gauges specific to your application. For applications with emissions requirements, some ML series panels can be equipped with Tier 4 controls. ML series panels are capable of handling sophisticated engine diagnostics as well as basic engine alarm/shutdown with integrated throttle control.

Features
ML25	ML50	ML100	ML150	MLC380
PowerView^® 25 Display Uses SAE J1939 CAN network Increment / Decrement throttle switch Optional Tier 4 regeneration switch Keyswitch Fuse 21-Pin Deutsch connector Murphy standard shock mounts Black powder-coated enclosure Enclosed or Flat Panel	PowerView^® 25 Display Uses SAE J1939 CAN network PVCAN water temperature and oil pressure gauges Increment / Decrement throttle switch Optional Tier 4 regeneration switch Keyswitch Fuse 21-Pin Deutsch connector Murphy standard shock mounts Black powder-coated enclosure Enclosed or Flat Panel	PowerView^® 101 Display Uses SAE J1939 CAN network Increment / Decrement throttle switch Optional Tier 4 regeneration switch Keyswitch Fuse 21-Pin Deutsch connector Murphy standard shock mounts Black powder-coated enclosure Enclosed or Flat Panel	PowerView^® 150 Display Uses SAE J1939 CAN network PVCAN water temperature and oil pressure gauges Space for two additional gages Various throttle options available (Increment / Decrement, Variable, Morse, No Throttle) Optional Tier 4 regeneration switch Keyswitch Two fuses 21-Pin Deutsch connector Murphy standard shock mounts Black powder-coated enclosure Enclosed or Flat Panel	PowerView^® 380 Display Uses SAE J1939 CAN network Compact in Size Configurable display screens Tier 4 functionality Keyswitch TSC1 Throttling Fuse 21-Pin Deutsch connector & 31 Pin for Additional I/O Murphy standard shock mounts Black powder-coated enclosure
Murphy Industrial Harness Line
The Murphy Industrial Harness (MIH) product line will allow connection from ML Panels to all major engine manufacturer’s engines. For more information on the MIH panel series, please contact our Sales team at sales@ec.barn3s.com, or call 918.317.4100 and ask for Sales.

Recent Posts