The highly cost effective HGC-2 is designed to control a generator driven by a hydraulic motor where speed is controlled by a proportional solenoid valve, either directly at the motor or as part of the pump compensator.
The HGC-2 is a closed loop controller that monitors the AC line voltage from the generator output for outer loop closure and provides the necessary current to a valve coil in order to maintain the desired generator frequency. The HGC-2 has a single LED indicator on the top of the unit to provide an overview of the operating status.
Item | HGC-2 | Description |
Function | Hydraulic Generator Controller | Closed loop controller that monitors the AC line voltage from the generator |
Number of Coils | 1 Single | 600 mAmps, 1.2Amps or 2.5Amps – See Order Guide |
Control Input | Frequency | 100 to 250 VAC (RMS), 50/60Hz |
Connector | 8-Pin Deutsch | |
Mating Connector Kit | P/N: 999-10073 | |
Graphical User Interface (GUI) | P/N: 023-00228 | Set-up & Diagnostic software – Free Download |
HGC-2 Programming Cable | P/N: 999-10166 | USB connection |
Physical | 94L x 94W x 13H mm | 2 x # 8 Mounting screws |
Mobile Equipment | IP67 (Module Only) | Solid potted |
Temperature ºC | -40 to +75 Deg. C | Operating |
Voltage | 9 to 28 VDC | Reverse polarity protection and transient protection |
Certifications | CE | Declaration of conformity |
Model | Description |
---|---|
HGC2-06 | 600mA current range |
HGC2-12 | 1200mA current range |
HGC2-25 | 2500mA current range |
999-10228 | Prototype harness |
999-10166 | Communication cable |
999-10073 | Mating connector kit |
The current range represents the maximum current output available. The module output current should ideally just exceed or equal the valve selected.