Menu
The DRC Series offers versatility and ease of use in a narrow DIN-rail mounted housing.
The DRC is an electronic control module for use with proportional solenoid valves in open loop systems. The module will provide current to the solenoids of the valve in response to various types of signals provided by the control system. Indicators on the front of the module provide an overview of the operating status. System configuration is accomplished through a convenient remote terminal. All settings are stored in permanent memory within the unit. The unit is housed in an attractive, compact enclosure
| Item | DRC |
| Supply Voltage | 9 to 32VDC |
| Supply Current | Isol + 50mA |
| Output Current | “-06A” 600mA or “-12A” 1.2A or “-25A” 2.5A Maximum |
| Solenoid Resistance | 2 Ohms Minimum |
| Reference Voltages | -10V, +10V @ 20mA |
| Dither Settings | 30, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 1000 Hz |
| Analog Input Range | “DRC-Vxx” -10 to 10V, “DRC-Axx” 0 to 20mA |
| Analog Input Impedance | “DRC-Vxx” 38 K Ohms, “DRC-Axx” 250 Ohm |
| Operating Temperature Range | -20 to +70 Deg. C |
| Enclosure | Polyamide |
| Dimensions | Inch: 0.69 W x 4.50 H x 4.30 D mm: 17.5 W x 114.5 H x 109.4 D |
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information about California Propsition 65, go to www.P65Warnings.ca.gov or visit our California Proposition 65 page.| Model | Output Channels | Input | Output |
|---|---|---|---|
| DRC1-V06 | 1 | Voltage Input -10V to +10V | 600mA Output |
| DRC1-V12 | 1 | Voltage Input -10V to +10V | 1.2A Output |
| DRC1-V25 | 1 | Voltage Input -10V to +10V | 2.5A Output |
| DRC1-A06 | 1 | Current Input 0 to 20mA | 600mA Output |
| DRC1-A12 | 1 | Current Input 0 to 20mA | 2.5A Output |
| DRC1-A25 | 1 | Current Input 0 to 20mA | 2.5A Output |
| DRC4-V06 | 4 | Voltage Input -10V to +10V | 600mA Output |
| DRC4-V12 | 4 | Voltage Input -10V to +10V | 1.2A Output |
| DRC4-V25 | 4 | Voltage Input -10V to +10V | 2.5A Output |
| DRC4-A06 | 4 | Current Input 0 to 20mA | 600mA Output |
| DRC4-A12 | 4 | Current Input 0 to 20mA | 1.2A Output |
| DRC4-A25 | 4 | Current Input 0 to 20mA | 2.5A Output |
