• Operating Pressure Range: See How to Order under the PXT-K Series Model Number Matrix.
• Operating Temperature: -40 to 180° F (-40 to 82° C)
• Compensated Temp Range: -20 to 160° F (-29 to 71° C)

Physical Characteristics

• Process Connection: 1/4 NPT female with 7/8” Hex nut
• Electrical Connection (PXT-K-XXX): 1/2” NPT male conduit connection with 60” long cable, vented
• Enclosure: NEMA 4/IP65 or better
• Body: 316L stainless steel. Complies with NACE MR0175
• Wetted Parts: 316L stainless steel
• Environmental Effect (Humidity): No effect for 0-95%, non-condensing
• Mounting: Transmitter can be installed in any axis. Transmitter position has negligible effect on performance as long as it is perpendicular to the flow being monitored.
• Shock Resistance: 1000g per IEC 60068-2-6 (Mechanical Shock)
• Vibration Resistance: 20G per IEC 60068-2-6 (Vibration under resonance)
• Wiring Protection: Protected against reverse polarity and short circuit, 48 VDC Maximum
• Supply Voltage: 8 – 30 VDC (Typically 24 VDC)
• Transmitter Output: 4-20mA, two wire configurations with load characteristics
• Insulation: Greater than 10MΩ @ 300 VDC
• Electromagnetic Compatibility (EMC): Standards; EN 61000-6-2:2005, EN 61000-6-3:2007, EN 61326-2-3:2006
• Voltage Surge/Spike Protection: Protection against a 600 volt spike per IEC 60-2
• Shipping Weight: 6.5 ounces

Applicable Standards

• NACE MR0175
  • Compliant with the requirements
• CSA (c/us):
  • Class I / II / III, Div 1, Groups A-F T4
  • Class I / II / III, Div 2, Groups A-D,F,G T4
• ATEX:
  • IBExU 10 ATEX 1124 X
  • II 1G Ex ia IIC T6-T4
  • II 3G Ex nA IIC T6